source:
branches/PublicaMundi_David-devel/docs/install/windows.rst
@
960
| Last change on this file since 960 was 722, checked in by djay, 9 years ago | |
|---|---|
|
|
| File size: 11.0 KB | |
Installation on Windows |trade|
Compile ZOO-Project from source
.. include:: <xhtml1-lat1.txt>
.. include:: <xhtml1-symbol.txt>
Installation on Windows |trade| ====================
Warning
Ensure to first perform the :ref:`prerequisite steps <install-prereq>` before compiling the ZOO Kernel.
The following steps are for use with the Microsoft Visual Studio compiler (and tested with MSVC 2010).
Make sure the gnuwin32 tools bison.exe and flex.exe are found in your path. You can download the GNUwin32 tools here.
Modify the nmake.opt file to point to your local libraries. Note that you can also use definition directly in the command line if you prefer. See :ref:`win_configure_options` for details about this options.
Execute:
nmake /f makefile.vc
A file zoo_loader.cgi and libzoo_service.dll should be created. Note that if another file named zoo_loader.cgi.manifest is also created, you will have to run another command:
nmake /f makefile.vc embed-manifest
Copy the files zoo_loader.cgi, libzoo_service.dll and main.cfg into your cgi-bin directory.
Using the command prompt, test the ZOO-Kernel by executing the following command:
D:\ms4w\Apache\cgi-bin> zoo_loader.cgi
which should display a message such as:
Content-Type: text/xml; charset=utf-8 Status: 200 OK <?xml version="1.0" encoding="utf-8"?> <ows:ExceptionReport xmlns:ows="http://www.opengis.net/ows/1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xlink="http://www.w3.org/1999/xlink" xsi:schemaLocation="http://www.opengis.net/ows/1.1 http://schemas.opengis.net/ows/1.1.0/owsExceptionReport.xsd" xml:lang="en-US" version="1.1.0"> <ows:Exception exceptionCode="MissingParameterValue"> <ows:ExceptionText>Parameter <request> was not specified</ows:ExceptionText> </ows:Exception> </ows:ExceptionReport>Edit the main.cfg file so that it contains values describing your WPS service. An example of such a file running on Windows is:
[main] encoding = utf-8 version = 1.0.0 serverAddress = http://localhost/ lang = en-CA tmpPath=/ms4w/tmp/ms_tmp/ tmpUrl = /ms_tmp/ [identification] title = The Zoo WPS Development Server abstract = Development version of ZooWPS. See http://www.zoo-project.org fees = None accessConstraints = none keywords = WPS,GIS,buffer [provider] providerName=Gateway Geomatics providerSite=http://www.gatewaygeomatics.com individualName=Jeff McKenna positionName=Director role=Dev adressDeliveryPoint=1101 Blue Rocks Road addressCity=Lunenburg addressAdministrativeArea=False addressPostalCode=B0J 2C0 addressCountry=ca addressElectronicMailAddress=info@gatewaygeomatics.com phoneVoice=False phoneFacsimile=False
Open a web browser window, and execute a GetCapababilites request on your WPS service: http://localhost/cgi-bin/zoo_loader.cgi?request=GetCapabilities&service=WPS
The response should be displayed in your browser, such as:
<wps:Capabilities xsi:schemaLocation="http://www.opengis.net/wps/1.0.0 http://schemas.opengis.net/wps/1.0.0/wpsGetCapabilities_response.xsd" service="WPS" xml:lang="en-US" version="1.0.0"> <ows:ServiceIdentification> <ows:Title>The Zoo WPS Development Server</ows:Title> <ows:Abstract> Development version of ZooWPS. See http://www.zoo-project.org </ows:Abstract> <ows:Keywords> <ows:Keyword>WPS</ows:Keyword> <ows:Keyword>GIS</ows:Keyword> <ows:Keyword>buffer</ows:Keyword> </ows:Keywords> <ows:ServiceType>WPS</ows:ServiceType> <ows:ServiceTypeVersion>1.0.0</ows:ServiceTypeVersion> ...
Build options
Various build options can be set in the nmake.opt file to define the location of the built libraries you want to use to build your ZOO-Kernel. Some are optional and some are required, they are listed below exhaustively:
gettext (Required)
The location of the libintl (built when building gettext) should be specified by defining the INTL_DIR environment variable. It supposes that the header and the intl.lib file are available.
So for instance, in case you build the gettext in \buildkit\srcs\gettext-0.14.6, you may define the following before running nmake /f makefile.vc:
set INTL_DIR=\buildkit\srcs\gettext-0.14.6\gettext-runtime\intl
libCURL (Required)
The location of the libCURL should be specified by defining the CURL_DIR environment variable. It supposes that there are 2 sub-directory include containing the libCURL header and lib which contains the libcurl.lib file.
So for instance, in case you build the libCURL in \buildkit\srcs\curl-7.38.0, you may define the following before running nmake /f makefile.vc:
set CURL_DIR=\buildkit\srcs\curl-7.38.0\builds\libcurl-vc10-x86-release-dll-ssl-dll-zlib-dll-ipvs6-sspi
libFCGI (Required)
The location of the libFCGI should be specified by defining the FCGI_DIR environment variable. It supposes that there are 2 sub-directory include containing the FastCGI header and libfcgi/Release which contains the libfcgi.lib file.
So for instance, in case you build the libXML2 library in \buildkit\srcs\fcgi-2.4.1, you may define the following before running nmake /f makefile.vc:
set FCGI_DIR=\buildkit\srcs\fcgi-2.41.1
libXML2 (Required)
The location of the libXML2 should be specified by defining the XML2_DIR environment variable. It supposes that there are 2 sub-directory include containing the libXML2 header and win32\bin.msvc which contains the libxml2.lib file.
So for instance, in case you build the libXML2 library in \buildkit\srcs\libxml2-2.9.0, you may define the following before running nmake /f makefile.vc:
set XML2_DIR=\buildkit\srcs\libxml2-2.9.0
OpenSSL (Required)
The location of the OpenSSL library should be specified by defining the SSL_DIR environment variable. It supposes that there are 2 sub-directory inc32 containing the header files and out32dll which contains the ssleay32.lib file.
So for instance, in case you build the libXML2 library in \buildkit\srcs\openssl-1.0.2c, you may define the following before running nmake /f makefile.vc:
set SSL_DIR=\buildkit\srcs\openssl-1.0.2c
GDAL (Required)
The location of the GDAL library should be specified by defining the GDAL_DIR environment variable. It corresponds to the path where you uncompress and built GDAL, it supposes that you have the gdal_i.lib file available in this directory.
So for instance, in case you build the libXML2 library in \buildkit\srcs\gdal-1.10.1, you may define the following before running nmake /f makefile.vc:
set GDAL_DIR=\buildkit\srcs\gdal-1.10.1
MapServer (Optional)
The location of the MapServer library path should be specified by defining the MS_DIR environment variable. It corresponds to the path where you build MapServer on your system, this directory should contain the nmake.opt file used.
So for instance, in case you build Python in \buildkit\srcs\mapserver-6.2.0, you may define the following before running nmake /f makefile.vc:
set MS_DIR=\buildkit\srcs\mapserver-6.2.0
Python (Optional)
The location of the Python binaries path should be specified by defining the PY_DIR environment variable. It corresponds to the path where you build Python on your system. The location of the pythonXX.lib files should be specified by setting the PY_LIBRARY environment variable.
So for instance, in case you build Python in \buildkit\srcs\Python-2.7, you may define the following before running nmake /f makefile.vc:
set PY_DIR=\buildkit\srcs\Python-2.7 set PY_LIBRARY=\buildkit\srcs\Python-2.7\PCBuild\python27.lib
JavaScript (Optional)
The location of libmozjs should be specified by defining the JS_DIR environment variable. It corresponds to the path where you build libmozjs on your system, it supposes that the header and the mozjs185-1.0.lib file are available in this directory.
So for instance, in case you build libmozjs in \buildkit\srcs\js-1.8.5, you may define the following before running nmake /f makefile.vc:
set JS_DIR=\buildkit\srcs\js-1.8.5
PHP (Optional)
The location of PHP should be specified by defining the PHP_DIR environment variable. It corresponds to the path where you build PHP on your system. The location of the php5embed.lib files should be specified by setting the PHP_LIB environment variable.
So for instance, in case you build PHP in \buildkit\srcs\php-5.5.10, you may define the following before running nmake /f makefile.vc:
set PHP_DIR=\buildkit\srcs\php-5.5.10 set PHP_LIB=\buildkit\srcs\php-5.5.10\Release_TS\php5embed.lib
Database backend (Optional)
ZOO-Kernel can use a database backend to store ongoing status informations of running services, for activating this operation mode, you should define the evironment variable DB and set it to any value. So, to activate this option, you may use the following before running nmake /f makefile.vc:
set DB=activated
Note
To learn how to setup the corresponding database, please refer to :ref:`this section <zoo_create_db_backend>`.
Optionally Compile Individual Services
An example could be the OGR base-vect-ops provider located in the zoo-project\zoo-services\ogr\base-vect-ops directory.
First edit the makefile.vc located in that directory, and execute:
nmake /f makefile.vc
Inside that same directory, the ogr_service.zo file should be created.
Copy all the files inside zoo-services\ogr\base-vect-ops\cgi-env into your cgi-bin directory
Test this service provider through the following URL:
The response displayed in your browser should contain:
<wps:ProcessSucceeded>Service "Buffer" run successfully.</wps:ProcessSucceeded>
