configure.ac @ 520

Last change on this file since 520 was 520, checked in by david, 9 years ago
check libxslt install
File size: 19.2 KB

Rev	Line
[435]	1	AC_INIT([ZOO Kernel], [1.4.0], [bugs@zoo-project.org])
[1]	2
	3	# Checks for programs.
	4	AC_PROG_YACC
	5	AC_PROG_CC
	6	AC_PROG_LEX
	7	AC_PROG_CXX
	8	AC_PROG_SED
	9
	10	# Checks for libraries.
	11	AC_CHECK_LIB([cgic], [cgiMain])
	12	AC_CHECK_LIB([curl], [curl_easy_init curl_easy_setopt curl_easy_cleanup curl_easy_perform])
	13	AC_CHECK_LIB([dl], [dlopen dlsym dlerror dlclose])
	14	AC_CHECK_LIB([fl], [main])
	15	AC_CHECK_LIB([pthread], [main])
	16	AC_CHECK_LIB([ssl], [main])
	17
	18	# Checks for header files.
	19	AC_FUNC_ALLOCA
	20	AC_CHECK_HEADERS([fcntl.h inttypes.h libintl.h malloc.h stddef.h stdlib.h string.h unistd.h])
	21
	22	# Checks for typedefs, structures, and compiler characteristics.
	23	AC_HEADER_STDBOOL
	24	AC_TYPE_INT16_T
	25	AC_TYPE_INT32_T
	26	AC_TYPE_INT8_T
	27	AC_TYPE_PID_T
	28	AC_TYPE_SIZE_T
	29	AC_TYPE_UINT16_T
	30	AC_TYPE_UINT32_T
	31	AC_TYPE_UINT8_T
	32
	33	# Checks for library functions.
	34	AC_FUNC_FORK
	35	AC_FUNC_MALLOC
	36	AC_FUNC_REALLOC
	37	AC_CHECK_FUNCS([dup2 getcwd memset setenv strdup strstr])
	38
	39	#============================================================================
[466]	40	# Detect if run on debian / ubuntu
	41	#============================================================================
	42	if test -f "/usr/bin/dpkg"
	43	then
	44	DEB_DEF=-DDEB
	45	fi
	46	AC_SUBST([DEB_DEF])
	47
[518]	48
	49
	50
	51	AC_ARG_WITH([cgi-dir],
	52	[AS_HELP_STRING([--with-cgi-dir=PATH], [specify an alternative cgi directory path ( default: /usr/lib/cgi-bin) ])],
	53	[CGI_DIR="$withval"], [CGI_DIR="/usr/lib/cgi-bin"])
	54	AC_SUBST([CGI_DIR])
	55
[466]	56	#============================================================================
[1]	57	# Detect if gdal is installed
	58	#============================================================================
	59
	60	AC_ARG_WITH([gdal-config],
	61	[AS_HELP_STRING([--with-gdal-config=FILE], [specify an alternative gdal-config file])],
	62	[GDAL_CONFIG="$withval"], [GDAL_CONFIG=""])
	63	if test -z $GDAL_CONFIG;
	64	then
	65	AC_PATH_PROG([GDAL_CONFIG], [gdal-config])
	66	if test -z $GDAL_CONFIG;
	67	then
	68	AC_MSG_ERROR([could not find gdal-config from libgdal within the current path. You may need to try re-running configure with a --with-gdal-config parameter.])
	69	fi
	70
	71	else
	72	if test -f $GDAL_CONFIG; then
	73	AC_MSG_RESULT([Using user-specified gdal-config file: $GDAL_CONFIG])
	74	else
	75	AC_MSG_ERROR([the user-specified gdal-config file $GDAL_CONFIG does not exist])
	76	fi
	77	fi
	78
	79	GDAL_CFLAGS="`$GDAL_CONFIG --cflags`"
	80	GDAL_LIBS="`$GDAL_CONFIG --libs`"
	81
	82	AC_SUBST([GDAL_CFLAGS])
	83	AC_SUBST([GDAL_LIBS])
	84
	85	# ===========================================================================
[465]	86	# Detect if libyaml is available
	87	# ===========================================================================
	88
	89	AC_ARG_WITH([yaml],
	90	[AS_HELP_STRING([--with-yaml=PATH], [specify an alternative location for the fastcgi library])],
	91	[YAMLPATH="$withval"], [YAMLPATH=""])
	92
	93	if test -z "$YAMLPATH"
	94	then
	95	YAML_LDFLAGS=""
	96	YAML_CPPFLAGS=""
	97	YAML_FILE=""
	98	YAML_FILE1=""
	99	else
	100
	101	# Extract the linker and include flags
	102	YAML_LDFLAGS="-L$YAMLPATH/lib -lyaml"
	103	YAML_CPPFLAGS="-I$YAMLPATH/include -DYAML"
	104	YAML_FILE="service_yaml.o"
	105	YAML_FILE1="zcfg2yaml"
	106
	107	# Check headers file
	108	CPPFLAGS_SAVE="$CPPFLAGS"
	109	CPPFLAGS="$YAML_CPPFLAGS"
	110	LDFLAGS_SAVE="$LDFLAGS"
	111	LDFLAGS="YAML_LDFLAGS"
	112	AC_CHECK_LIB([yaml], [yaml_parser_initialize,yaml_parser_set_input_file,yaml_parser_scan])
	113	AC_CHECK_HEADERS([yaml.h],
	114	[], [AC_MSG_ERROR([could not find headers include related to YAML])])
	115
	116	fi
	117	AC_SUBST([YAML_CPPFLAGS])
	118	AC_SUBST([YAML_LDFLAGS])
	119	AC_SUBST([YAML_FILE])
	120	AC_SUBST([YAML_FILE1])
	121
	122	# ===========================================================================
[459]	123	# Detect if fastcgi is available
	124	# ===========================================================================
	125
	126	AC_ARG_WITH([fastcgi],
	127	[AS_HELP_STRING([--with-fastcgi=PATH], [specify an alternative location for the fastcgi library])],
[465]	128	[FCGIPATH="$withval"], [FCGIPATH="/usr"])
[459]	129
	130	# Extract the linker and include flags
	131	FCGI_LDFLAGS="-L$FCGIPATH/lib"
	132	FCGI_CPPFLAGS="-I$FCGIPATH/include"
	133
	134	# Check headers file
	135	CPPFLAGS_SAVE="$CPPFLAGS"
	136	CPPFLAGS="$FCGI_CPPFLAGS"
[465]	137	LDFLAGS_SAVE="LDFLAGS"
	138	LDFLAGS="$FCGI_LDFLAGS"
	139	AC_CHECK_LIB([fcgi], [main])
[459]	140	AC_CHECK_HEADERS([fcgi_stdio.h],
	141	[], [AC_MSG_ERROR([could not find headers include related to fastcgi])])
	142
	143	AC_SUBST([FCGI_CPPFLAGS])
	144	AC_SUBST([FCGI_LDFLAGS])
	145
	146	# ===========================================================================
	147	# Detect if proj is installed
	148	# ===========================================================================
	149
	150	AC_ARG_WITH([proj],
	151	[AS_HELP_STRING([--with-proj=PATH], [specify an alternative location for PROJ4 setup])],
	152	[PROJPATH="$withval"], [PROJPATH=""])
	153
	154	# Extract the linker and include flags
	155	PROJ_LDFLAGS="-L$PROJPATH/lib"
	156	PROJ_CPPFLAGS="-I$PROJPATH/include"
	157
	158	# Check headers file
	159	CPPFLAGS_SAVE="$CPPFLAGS"
	160	CPPFLAGS="$PROJ_CPPFLAGS"
	161	AC_CHECK_HEADERS([proj_api.h],
	162	[], [AC_MSG_ERROR([could not find headers include related to PROJ4])])
	163
	164	AC_SUBST([PROJ_CPPFLAGS])
	165	AC_SUBST([PROJ_LDFLAGS])
	166
	167	# ===========================================================================
[1]	168	# Detect if libxml2 is installed
	169	# ===========================================================================
	170
	171	AC_ARG_WITH([xml2config],
	172	[AS_HELP_STRING([--with-xml2config=FILE], [specify an alternative xml2-config file])],
	173	[XML2CONFIG="$withval"], [XML2CONFIG=""])
	174
	175	if test "x$XML2CONFIG" = "x"; then
	176	# XML2CONFIG was not specified, so search within the current path
	177	AC_PATH_PROG([XML2CONFIG], [xml2-config])
	178
	179	# If we couldn't find xml2-config, display a warning
	180	if test "x$XML2CONFIG" = "x"; then
	181	AC_MSG_ERROR([could not find xml2-config from libxml2 within the current path. You may need to try re-running configure with a --with-xml2config parameter.])
	182	fi
	183	else
	184	# XML2CONFIG was specified; display a message to the user
	185	if test "x$XML2CONFIG" = "xyes"; then
	186	AC_MSG_ERROR([you must specify a parameter to --with-xml2config, e.g. --with-xml2config=/path/to/xml2-config])
	187	else
	188	if test -f $XML2CONFIG; then
	189	AC_MSG_RESULT([Using user-specified xml2-config file: $XML2CONFIG])
	190	else
	191	AC_MSG_ERROR([the user-specified xml2-config file $XML2CONFIG does not exist])
	192	fi
	193	fi
	194	fi
	195
	196	# Extract the linker and include flags
	197	XML2_LDFLAGS=`$XML2CONFIG --libs`
	198	XML2_CPPFLAGS=`$XML2CONFIG --cflags`
	199
	200	# Check headers file
	201	CPPFLAGS_SAVE="$CPPFLAGS"
	202	CPPFLAGS="$XML2_CPPFLAGS"
	203	AC_CHECK_HEADERS([libxml/tree.h libxml/parser.h libxml/xpath.h libxml/xpathInternals.h],
	204	[], [AC_MSG_ERROR([could not find headers include related to libxml2])])
	205
	206	# Ensure we can link against libxml2
	207	LIBS_SAVE="$LIBS"
	208	LIBS="$XML2_LDFLAGS"
	209	AC_CHECK_LIB([xml2], [xmlInitParser], [], [AC_MSG_ERROR([could not find libxml2])], [])
	210
	211	AC_SUBST([XML2_CPPFLAGS])
	212	AC_SUBST([XML2_LDFLAGS])
	213
[520]	214
	215
	216	# ===========================================================================
	217	# Detect if libxslt is installed
	218	# ===========================================================================
	219
	220	AC_ARG_WITH([xsltconfig],
	221	[AS_HELP_STRING([--with-xsltconfig=FILE], [specify an alternative xslt-config file])],
	222	[XSLTCONFIG="$withval"], [XSLTCONFIG=""])
	223
	224	if test "x$XSLTCONFIG" = "x"; then
	225	# XSLTCONFIG was not specified, so search within the current path
	226	AC_PATH_PROG([XSLTCONFIG], [xslt-config])
	227
	228	# If we couldn't find xslt-config, display a warning
	229	if test "x$XSLTCONFIG" = "x"; then
	230	AC_MSG_ERROR([could not find xslt-config from libxslt within the current path. You may need to try re-running configure with a --with-xtltconfig parameter.])
	231	fi
	232	else
	233	# XSLTCONFIG was specified; display a message to the user
	234	if test "x$XSLTCONFIG" = "xyes"; then
	235	AC_MSG_ERROR([you must specify a parameter to --with-xsltconfig, e.g. --with-xsltconfig=/path/to/xslt-config])
	236	else
	237	if test -f $XSLTCONFIG; then
	238	AC_MSG_RESULT([Using user-specified xslt-config file: $XSLTCONFIG])
	239	else
	240	AC_MSG_ERROR([the user-specified xslt-config file $XSLTCONFIG does not exist])
	241	fi
	242	fi
	243	fi
	244
	245	# Extract the linker and include flags
	246	XSLT_LDFLAGS=`$XSLTCONFIG --libs`
	247	XSLT_CPPFLAGS=`$XSLTCONFIG --cflags`
	248
	249	# Check headers file
	250	CPPFLAGS_SAVE="$CPPFLAGS"
	251	CPPFLAGS="$XML2_CPPFLAGS"
	252	AC_CHECK_HEADERS([libxslt/xslt.h libxslt/xsltInternals.h libxslt/transform.h libxslt/xsltutils.h],
	253	[], [AC_MSG_ERROR([could not find headers include related to libxlst])])
	254
	255	# Ensure we can link against libxslt
	256	LIBS_SAVE="$LIBS"
	257	LIBS="$XSLT_LDFLAGS"
	258
	259	AC_SUBST([XSLT_CPPFLAGS])
	260	AC_SUBST([XSLT_LDFLAGS])
	261
	262
	263
	264
	265
[297]	266	#============================================================================
	267	# Detect if mapserver is installed
	268	#============================================================================
	269
	270	AC_ARG_WITH([mapserver],
	271	[AS_HELP_STRING([--with-mapserver=PATH], [specify the path for MapServer compiled source tree])],
	272	[MS_SRC_PATH="$withval"], [MS_SRC_PATH=""])
[305]	273
[297]	274	if test -z $MS_SRC_PATH;
	275	then
[305]	276	MS_CPPFLAGS=""
	277	MS_LDFLAGS=""
[297]	278	else
	279	if test "x$MS_SRC_PATH" = "xmacos";
	280	then
	281	MS_LDFLAGS="/Library/Frameworks/MapServer.framework//Versions/6.0/MapServer -lintl"
	282	MS_CPPFLAGS="-DUSE_MS `/Library/Frameworks/MapServer.framework/Programs/mapserver-config --includes` -I/Library/Frameworks/MapServer.framework/Versions/Current/Headers/ -I../mapserver "
	283	AC_MSG_WARN([Please make sure that ../mapserver exists and contains MapServer source tree])
	284	AC_MSG_RESULT([Using MacOS X Framework for MapServer])
	285	else
	286	if test -d $MS_SRC_PATH; then
	287	MS_LDFLAGS="-L$MS_SRC_PATH -lmapserver `$MS_SRC_PATH/mapserver-config --libs`"
	288	MS_CPPFLAGS="-DUSE_MS `$MS_SRC_PATH/mapserver-config --includes` `$MS_SRC_PATH/mapserver-config --cflags` -I$MS_SRC_PATH "
	289
	290	AC_MSG_RESULT([Using user-specified MapServer src path: $MS_SRC_PATH])
	291	else
	292	AC_MSG_ERROR([the user-specified mapserver-config file $MS_SRC_PATH does not exist])
	293	fi
	294	fi
	295	MS_FILE="service_internal_ms.o"
	296	fi
	297
	298	MS_CFLAGS="$MS_CPPFLAGS"
	299	MS_LIBS="$MS_LDFLAGS"
	300
	301	AC_SUBST([MS_CFLAGS])
	302	AC_SUBST([MS_LIBS])
	303	AC_SUBST([MS_FILE])
	304
[1]	305	# ===========================================================================
[459]	306	# Detect if ruby is installed
	307	# ===========================================================================
	308	AC_ARG_WITH([ruby],
	309	[AS_HELP_STRING([--with-ruby=PATH], [To enable ruby support or specify an alternative directory for ruby installation, disabled by default])],
	310	[RUBY_PATH="$withval"; RUBY_ENABLED="-DUSE_RUBY"], [RUBY_ENABLED=""])
	311
	312	AC_ARG_WITH([rvers],
	313	[AS_HELP_STRING([--with-rvers=NUM], [To use a specific ruby version])],
	314	[RUBY_VERS="$withval"], [RUBY_VERS=""])
	315
	316
	317	if test -z "$RUBY_ENABLED"
	318	then
	319	RUBY_FILE=""
	320	else
	321	RUBY_FILE="service_internal_ruby.o"
	322
	323	# Extract the linker and include flags
	324	RUBY_LDFLAGS="-lruby"
	325	RUBY_CPPFLAGS="-I$RUBY_PATH -I$RUBY_PATH/x86_64-darwin13.0/ -DZRUBY_VERSION=$RUBY_VERS"
	326
	327	# Check headers file
	328	CPPFLAGS_SAVE="$CPPFLAGS"
	329	CPPFLAGS="$RUBY_CPPFLAGS"
	330	AC_CHECK_HEADERS([ruby.h],
	331	[], [AC_MSG_ERROR([could not find headers include related to libruby])])
	332
	333	# Ensure we can link against libphp
	334	LIBS_SAVE="$LIBS"
	335	LIBS="$RUBY_LDFLAGS"
	336	# AC_CHECK_LIB([lruby], [PyObject_CallObject], [], [AC_MSG_ERROR([could not find libpython])], [])
	337	AC_SUBST([RUBY_CPPFLAGS])
	338	AC_SUBST([RUBY_LDFLAGS])
	339	fi
	340
	341	AC_SUBST([RUBY_ENABLED])
	342	AC_SUBST([RUBY_FILE])
	343
	344	# ===========================================================================
[1]	345	# Detect if python is installed
	346	# ===========================================================================
	347
	348	AC_ARG_WITH([python],
[208]	349	[AS_HELP_STRING([--with-python=PATH], [To enable python support or specify an alternative directory for python installation, disabled by default])],
[29]	350	[PYTHON_PATH="$withval"; PYTHON_ENABLED="-DUSE_PYTHON"], [PYTHON_ENABLED=""])
[1]	351
[285]	352	AC_ARG_WITH([pyvers],
	353	[AS_HELP_STRING([--with-pyvers=NUM], [To use a specific python version])],
[284]	354	[PYTHON_VERS="$withval"], [PYTHON_VERS=""])
[1]	355
[284]	356
[29]	357	if test -z "$PYTHON_ENABLED"
	358	then
	359	PYTHON_FILE=""
[1]	360	else
[284]	361	PYTHONCONFIG="$PYTHON_PATH/bin/python${PYTHON_VERS}-config"
[29]	362	PYTHON_FILE="service_internal_python.o"
	363	if test "$PYTHON_PATH" = "yes"
	364	then
	365	# PHP was not specified, so search within the current path
[370]	366	PYTHONCFG_PATH=`which python${PYTHON_VERS}-config`
	367	if test -z "${PYTHONCFG_PATH}" ; then
	368	AC_PATH_PROG([PYTHONCONFIG], [python-config-${PYTHON_VERS}])
	369	else
[284]	370	AC_PATH_PROG([PYTHONCONFIG], [python${PYTHON_VERS}-config])
[370]	371	fi
[1]	372	else
[284]	373	PYTHONCONFIG="$PYTHON_PATH/bin/python${PYTHON_VERS}-config"
[1]	374	fi
	375
[29]	376	# Extract the linker and include flags
	377	PYTHON_LDFLAGS=`$PYTHONCONFIG --ldflags`
[459]	378	PYTHON_CPPFLAGS=`$PYTHONCONFIG --includes`
[1]	379
[29]	380	# Check headers file
	381	CPPFLAGS_SAVE="$CPPFLAGS"
	382	CPPFLAGS="$PYTHON_CPPFLAGS"
	383	AC_CHECK_HEADERS([Python.h],
[1]	384	[], [AC_MSG_ERROR([could not find headers include related to libpython])])
	385
[29]	386	# Ensure we can link against libphp
	387	LIBS_SAVE="$LIBS"
	388	LIBS="$PYTHON_LDFLAGS"
	389	PY_LIB=`$PYTHONCONFIG --libs \| sed -e 's/^.*$python2\..$$/\1/'`
	390	AC_CHECK_LIB([$PY_LIB], [PyObject_CallObject], [], [AC_MSG_ERROR([could not find libpython])], [])
	391	AC_SUBST([PYTHON_CPPFLAGS])
	392	AC_SUBST([PYTHON_LDFLAGS])
	393	fi
[1]	394
[29]	395	AC_SUBST([PYTHON_ENABLED])
	396	AC_SUBST([PYTHON_FILE])
[1]	397
	398	# ===========================================================================
	399	# Detect if php is installed
	400	# ===========================================================================
	401
	402	AC_ARG_WITH([php],
[208]	403	[AS_HELP_STRING([--with-php=PATH], [To enable php support or specify an alternative directory for php installation, disabled by default])],
[28]	404	[PHP_PATH="$withval"; PHP_ENABLED="-DUSE_PHP"], [PHP_ENABLED=""])
	405
	406
	407	if test -z "$PHP_ENABLED"
	408	then
	409	PHP_FILE=""
	410	else
[1]	411	PHPCONFIG="$PHP_PATH/bin/php-config"
	412	PHP_FILE="service_internal_php.o"
[28]	413	if test "$PHP_PATH" = "yes"
[1]	414	then
[28]	415	# PHP was not specified, so search within the current path
	416	AC_PATH_PROG([PHPCONFIG], [php-config])
[1]	417	else
[28]	418	PHPCONFIG="$PHP_PATH/bin/php-config"
[1]	419	fi
[28]	420
[1]	421	# Extract the linker and include flags
	422	PHP_LDFLAGS="-L/`$PHPCONFIG --prefix`/lib -lphp5"
	423	PHP_CPPFLAGS=`$PHPCONFIG --includes`
	424
	425	# Check headers file
	426	CPPFLAGS_SAVE="$CPPFLAGS"
	427	CPPFLAGS="$PHP_CPPFLAGS"
	428	AC_CHECK_HEADERS([sapi/embed/php_embed.h],
	429	[], [AC_MSG_ERROR([could not find headers include related to libphp])])
	430
	431	# Ensure we can link against libphp
	432	LIBS_SAVE="$LIBS"
	433	LIBS="$PHP_LDFLAGS"
	434	# Shouldn't we get php here rather than php5 :) ??
	435	AC_CHECK_LIB([php5], [call_user_function], [], [AC_MSG_ERROR([could not find libphp])], [])
	436	AC_SUBST([PHP_CPPFLAGS])
	437	AC_SUBST([PHP_LDFLAGS])
	438	fi
	439
	440	AC_SUBST([PHP_ENABLED])
	441	AC_SUBST([PHP_FILE])
	442
	443	# ===========================================================================
[15]	444	# Detect if perl is installed
	445	# ===========================================================================
	446
[28]	447	AC_ARG_WITH([perl],
[208]	448	[AS_HELP_STRING([--with-perl=PATH], [To enable perl support or specify an alternative directory for perl installation, disabled by default])],
[28]	449	[PERL_PATH="$withval"; PERL_ENABLED="-DUSE_PERL"], [PERL_ENABLED=""])
[15]	450
	451
[28]	452	if test -z "$PERL_ENABLED"
	453	then
	454	PERL_FILE=""
	455	else
[112]	456	PERL_FILE="service_internal_perl.o"
[28]	457	if test "$PERL_PATH" = "yes"
[15]	458	then
[112]	459	# Perl was not specified, so search within the current path
[15]	460	AC_PATH_PROG([PERLCONFIG], [perl])
	461	else
	462	PERLCONFIG="$PERL_PATH/bin/perl"
	463	fi
	464
	465	# Extract the linker and include flags
	466	PERL_LDFLAGS=`$PERLCONFIG -MExtUtils::Embed -e ldopts`
	467	PERL_CPPFLAGS=`$PERLCONFIG -MExtUtils::Embed -e ccopts`
	468
	469	# Check headers file
	470	CPPFLAGS_SAVE="$CPPFLAGS"
	471	CPPFLAGS="$PERL_CPPFLAGS"
	472	AC_CHECK_HEADERS([EXTERN.h],
	473	[], [AC_MSG_ERROR([could not find headers include related to libperl])])
	474
	475	AC_SUBST([PERL_CPPFLAGS])
	476	AC_SUBST([PERL_LDFLAGS])
	477	fi
	478
	479	AC_SUBST([PERL_ENABLED])
	480	AC_SUBST([PERL_FILE])
	481
	482	# ===========================================================================
[1]	483	# Detect if java is installed
	484	# ===========================================================================
	485
	486	AC_ARG_WITH([java],
[208]	487	[AS_HELP_STRING([--with-java=PATH], [To enable java support, specify a JDK_HOME, disabled by default])],
[46]	488	[JDKHOME="$withval"; JAVA_ENABLED="-DUSE_JAVA"], [JAVA_ENABLED=""])
[1]	489
[46]	490	if test -z "$JAVA_ENABLED"
[1]	491	then
[46]	492	JAVA_FILE=""
	493	else
[1]	494	JAVA_FILE="service_internal_java.o"
	495	if test "x$JDKHOME" = "x";
	496	then
[46]	497	AC_MSG_ERROR([could not find java installation path within the current path. You may need to try re-running configure with a --with-java parameter.])
	498	fi # JAVA was specified; display a message to the user
	499	if test "x$JDKHOME" = "xyes";
	500	then
	501	AC_MSG_ERROR([you must specify a parameter to --with-java, e.g. --with-java=/path/to/java])
[1]	502	fi
[77]	503
[1]	504	# Extract the linker and include flags
[77]	505	if test "x$JDKHOME" = "xmacos";
[1]	506	then
[77]	507	JAVA_LDFLAGS="-framework JavaVM"
[514]	508	JAVA_CPPFLAGS="-I/Applications/Xcode.app/Contents/Developer//Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk/System/Library/Frameworks/JavaVM.framework/Versions/A/Headers/"
[1]	509	else
[77]	510	if test -d "$JDKHOME/jre/lib/i386";
	511	then
	512	JAVA_LDFLAGS="-L$JDKHOME/jre/lib/i386/client/ -ljvm -lpthread"
	513	JAVA_CPPFLAGS="-I$JDKHOME/include -I$JDKHOME/include/linux"
	514	else
	515	JAVA_LDFLAGS="-L$JDKHOME/jre/lib/amd64/client/ -ljvm -lpthread"
	516	JAVA_CPPFLAGS="-I$JDKHOME/include -I$JDKHOME/include/linux"
	517	fi
[1]	518	fi
	519
	520	# Check headers file (second time we check that in fact)
	521	CPPFLAGS_SAVE="$CPPFLAGS"
	522	CPPFLAGS="$JAVA_CPPFLAGS"
	523	AC_CHECK_HEADERS([jni.h],
	524	[], [AC_MSG_ERROR([could not find headers include related to libjava])])
	525
	526	# Ensure we can link against libjava
	527	LIBS_SAVE="$LIBS"
	528	LIBS="$JAVA_LDFLAGS"
[77]	529	if test "x$JDKHOME" != "xmacos";
	530	then
	531	AC_CHECK_LIB([jvm], [JNI_CreateJavaVM], [], [AC_MSG_ERROR([could not find libjava])], [])
	532	fi
[1]	533
	534	AC_SUBST([JAVA_CPPFLAGS])
	535	AC_SUBST([JAVA_LDFLAGS])
	536	fi
	537
	538	AC_SUBST([JAVA_ENABLED])
	539	AC_SUBST([JAVA_FILE])
	540
	541	# ===========================================================================
	542	# Detect if spidermonkey is installed
	543	# ===========================================================================
	544
	545	AC_ARG_WITH([js],
[208]	546	[AS_HELP_STRING([--with-js=PATH], [specify --with-js=path-to-js to enable js support, specify --with-js on linux debian like, js support is disabled by default ])],
[46]	547	[JSHOME="$withval";JS_ENABLED="-DUSE_JS"], [JS_ENABLED=""])
[3]	548
[46]	549	if test -z "$JS_ENABLED"
[1]	550	then
[46]	551	JS_FILE=""
	552	else
[274]	553	JS_FILE="service_internal_js.o"
[46]	554	if test "$JSHOME" = "yes"
	555	then
[1]	556
[46]	557	#on teste si on est sous debian like
	558	if test -f "/usr/bin/dpkg"
[3]	559	then
[274]	560	if test -n "`dpkg -l \| grep libmozjs185-dev`"
[46]	561	then
[274]	562	JS_CPPFLAGS="-I/usr/include/js/"
	563	JS_LDFLAGS="-L/usr/lib -lmozjs185 -lm"
	564	JS_LIB="mozjs185"
[89]	565	else
[288]	566	XUL_VERSION="`dpkg -l \| grep xulrunner \| grep dev \| head -1\| awk '{print $3;}' \| cut -d'+' -f1`"
[89]	567	if test -n "$XUL_VERSION"
	568	then
	569	JS_CPPFLAGS="-I/usr/include/xulrunner-$XUL_VERSION"
	570	JS_LDFLAGS="-L/usr/lib/xulrunner-$XUL_VERSION -lmozjs -lm"
	571	JS_LIB="mozjs"
	572	else
[274]	573	AC_MSG_ERROR([You must install libmozjs185-dev or xulrunner-dev ])
[89]	574	fi
[46]	575	fi
[3]	576	else
[274]	577	AC_MSG_ERROR([You must specify your custom install of libmozjs185])
[3]	578	fi
	579	else
[274]	580	JS_CPPFLAGS="-I$JSHOME/include/js/"
	581	JS_LDFLAGS="-L$JSHOME/lib -lmozjs185 -lm"
	582	JS_LIB="mozjs185"
[46]	583
	584	fi
[1]	585	CPPFLAGS_SAVE="$CPPFLAGS"
[3]	586	CPPFLAGS="$JS_CPPFLAGS"
[46]	587
	588	#AC_CHECK_HEADERS([jsapi.h],
[3]	589	# [], [AC_MSG_ERROR([could not find headers include related to libjs])])
[1]	590
[46]	591
	592	LIBS_SAVE="$LIBS"
[3]	593	LIBS="$JS_LDFLAGS"
[1]	594
[288]	595	AC_CHECK_LIB([$JS_LIB], [JS_CompileFile,JS_CallFunctionName], [], [AC_MSG_ERROR([could not find $JS_LIB])], [])
[46]	596
[3]	597	AC_SUBST([JS_CPPFLAGS])
	598	AC_SUBST([JS_LDFLAGS])
[46]	599	fi
[3]	600
[1]	601	AC_SUBST([JS_ENABLED])
	602	AC_SUBST([JS_FILE])
	603
	604	AC_CONFIG_FILES([Makefile])
[284]	605	AC_CONFIG_FILES([ZOOMakefile.opts])
[1]	606	AC_OUTPUT

Note: See TracBrowser for help on using the repository browser.

Open WPS platform

source: trunk/zoo-project/zoo-kernel/configure.ac @ 520

Download in other formats:

Download now !

Support ZOO-Project

Search

Context Navigation

Main Navigation

ZOO Sponsors

Knowledge partners

Related links